IC Programming:

DP3T Plus

DP3T Plus responds to the industry’s ever-evolving demands by handling down to 1x1mm packages. Able to support laser/labeling/ ink/inkjet marking, and a maximum of 16 programming sockets to boost productivity for extreme high-capacity devices. The highest UPH goes up to 1300.

With the NuProgPlus series programmer, the system supports dual sockets & highest read/write speed goes up to 180/mb.

Auto Teach feature improves productivity by reducing the project setup time. This system is the epitome of versatility, making it an ideal solution for low-volume, high-mix production teams seeking efficiency without compromise.

High Throughput
The systen will be able to perform up to 1,300 UPH. (Units Per Hour).
High Expansibility
Able to embed with one set of NuProgPlus-S8-E or NuProg-Plus-S16-E, up to 16 programming sites.
Support All IC Families
- Supported IC EEPROM NAND/NOR FLASH, MCU, eMMC and UFS… etc.
- Supported IC Package: SOP, SSOP, TSSOP PLCC, QFN, LQFP and BGA… etc.
Adjustable Socket Actuating Kit
Adjust socket actuating kits make it easier and quicker to switch
to different types of socket adaptors according to the socket size.
Therefore, you will not need extra socket actuating kits!
Software Supports Work Project
Able to create a programming file directly through DediWare
according to your programming demands. It allows you to start
programming right after loading the project, which will greatly
reduce human errors.
Clamp Positioning Check
The system will automatically check if the clamps are installed
properly before production to avoid machine/product damage
caused by unmanned staff mistakes.
Support Different Input/Output Peripherals
Input/Output: Tube, Tape, and Tray.