+52 899 219 6674 | Contacto@solucinde.com
Feeders:
IF-S021
Air Blowing Feeder
The air blow feeder directs screws to the designated position through an air tube.
- Universal type, suitable for a wide range of screws.
- The distance between the guide rails can be adjusted according to the size of the screws.
- The feeding is reliable and the speed is high. It can perform one-to-one or two-to-one feeding.
- Used with automation equipment, it has a dedicated signal communication port.
- Real-time display of screw count, fault alarm, feeding delay, vibration delay.
- Equipped with a 4.3-inch HMI, the parameter adjustment is intuitive and convenient.
| Specification | Details |
| Machine dimensions | 332 (L) x 165 (W) x 250 (H) mm |
| Machine weight | 7.5 kg ± 0.5 kg |
| Electrical requirements | AC220V, 50Hz |
| Applicable Screws | – Screw Diameter: 1.5 ≤ D ≤ 5.0 mm |
| – Screw Length: L ≤ 20 mm | |
| Speed | 40 to approximately 60 pieces per minute |
| Capacity | 3,000 pieces (Based on M2.5×10 screws as reference) |