Feeders:

IF-S090-R

A screwdriving machine suitable for large screws.

The distance between guide rails can be freely adjusted according to the size of the screws.
The speed of the rotary table and the guide rail speed are controlled independently and can be adjusted as needed.
Counting function: real-time display of screw count, fault alarm, feed delay, vibration delay.
Counting function: real-time display of screw count, fault alarm, feed delay, vibration delay.
The quantity can be set from 0 to 9999. Both single-segment and multiple-segment modes can be selected (default is single-segment). The number of multiple segments and segment count can be set. The machine will stop when the set number is reached. After removing the screw, it will automatically enter the next cycle

Specification	Details
Machine dimensions	319.5 (Length) x 162.5 (Width) x 218 (Height) millimeters.
Machine weight	5 kilograms +- 0.2 kilograms.
Electrical Requirements	AC100V-240V, 50Hz/60Hz.
Applicable Screws (For sizes beyond this range, please contact us to customize non-standard products)	– Screw Diameter: 1.0 ≤ D ≤ 7.0 millimeters
	– Screw Length: L ≤ 18 millimeters
Speed	50 to approximately 100 pieces per minute (Adjustable)
Capacity	2,500 pieces (Based on M2.5×10 screws)