Pick and Place:

RS-1R

The consistent further development of the tried-and-tested technologies from the RS-1R opens up new, outstanding possibilities:

Even faster assembly of smallest chips (0201 metric) up to large components of 50 x 150 mm or 74 mm edge length for square components. The base frame of the RS-1R has been completely redesigned for this purpose.

The unique Takumi head covers even more different component heights and thus achieves a decisive speed advantage. The 360° visual component recognition allows the secure detection of user-specific polarity marks.

Thanks to the RFID integration in the nozzles, these can be traced back completely together with the components and boards.

Even faster assembly of smallest chips (0201 metric)
Takumi head covers even more different component heights.
The machine combines the features of a chip shooter with a
mounter for large components.

Smart Fast Modular Mounter	RS-1R
Conveyor Specification	standard 150mm conveyor extensions, upstream and downstream 250mm conveyor extensions, upstream and downstream
Board size	Minimum: 50 × 50 mm maximum 1 buffer: 650 × 370 mm (Single clamping) 950 × 370 mm (double clamping) 3 buffers: 360 × 370 mm 1,100 × 370 mm (double clamping) 500 × 370 mm 1,200 × 370 mm (double clamping) 600 × 370 mm
Component Height	25 mm
Component Size	0201*1 ～74 mm /150 × 50 mm
Placement speed	Optimum: 47,000CPH IPC9850: 31,000CPH
Placement accuracy	±35μｍ (Ｃｐｋ≧1)
Feeder inputs	max.112
Power Supply	ＡＣ200 ～ 415Ｖ*3 .3-phases
Apparent power	2.2kVA
Operating air pressure	0.5±0.05MPa
Air consumption (standard)	200 l/min for internal vacuum generator, 50 l/min with optional vacuum pump
Machine dimensions (W x D x H)	1,500×1,810×1,440 mm 1,800×1,810×1,440 mm 2,000×1,810×1,440 mm
Mass (approximately)	1,700kg