LX-8

Pick and Place:

The JUKI LX-8 pick and place machine is an advanced, high-speed, and flexible solution. With a mounting speed of up to 105,000 CPH and support for 160 feeders, it excels in production efficiency and can handle components ranging from 0201 to 65 mm. It integrates laser recognition technology for precise placement and features a head-exchange system for versatility. Its user interface is designed for ease of use, resembling a smartphone, making it ideal for demanding production environments.

Low impact placement.
Wide component range.
Flexible head configuration
High flexibility.
Swappable heads – any combination of JUKI’s P20S and Takumi heads!
P20S – High-precision planet head for high-speed placemen.
Takumi head – Dynamic Height 8 nozzle placement head automatically adjusts pick and placement height.
Unprecedented speeds of up to 105,000 CPH with an impressive accuracy rate of ±40 μm (Cpk ≥1)
Holds 160 8 mm feeders and the width is only 1.6m

Category	Specification
Model	Advanced Flexible Mounter LX‑8
Board Size	Single Clamping: 50 × 50 mm to 410 × 400/500 mm Double Clamping: 50 × 50 mm to 810 × 400/500 mm
Model Configuration	P20S × 2 P20S + Takumi Takumi + Takumi
Component Height	3 mm / 25 mm (depending on configuration)
Component Size	Minimum: 0201 / 03015 Maximum: 5 mm / 65 mm or 10 × 90 mm / 50 × 75 mm
Placement Speed (Optimum)	105,000 CPH / 99,500 CPH / 94,000 CPH
Placement Accuracy	±40 μm (25 μm) Cpk ≥ 1 ±30 μm Cpk ≥ 1
Feeder Capacity	Tape: Max. 160 Tray: Max. 30 / Max. 60
Power Supply	3‑phase AC 200V, 220–430V
Apparent Power	2.49 kVA
Operating Air Pressure	0.5 ± 0.05 MPa
Air Consumption	50 L/min ANR
Machine Dimensions (W × D × H)	1,600 mm × 1,800 mm × 1,440 mm
Mass (Approx.)	2,500 kg