Cleaning Processes:

WT-NZC

WT-NZC suction nozzle cleaning machine adopts multi nozzle spray cleaning method, uses hydrodynamics to break water and produce very small water mist. A powerful kinetic energy is formed by the sound speed and is sprayed on the suction nozzle to form a continuous energy field above the suction nozzle to be cleaned. Smash dirt on the surface and inside of suction nozzle.

The machine does not need any solvent and can be cleaned with industrial pure waterCleaning: the machine is fully automatic and can clean 30 suction nozzles at a time. Different types of suction nozzles are equipped with different tool trays, and suction nozzles of any type of SMT machine can be cleaned. Compressed air will blow dry automatically after cleaningInspection: take out the fixture tray and put it on the special suction nozzle inspection device for inspection, and observe the real clean condition of the suction nozzle after cleaning

Model	WT-NZC
Equipment size	L× W×H	440×500 ×530 （mm）
Equipment weight	Quality	35KG
Cleaning liquid	Type of cleaning fluid	Industrial purified water
Cleaning liquid	Consumption	≤350CC/H
Use fluid	Gas source	compressed air
	Operating pressure range	0.5 – 0.65Mpa(When cleaning)
	Injection pressure	≤0.4Mpa
	Air consumption	≤280ml/min
Power Supply	Voltage	AC220V 50HZ
Power Supply	Rated power consumption	Maximum 100W
Suction tray	Specifications	30 PCs

30 suction nozzles are cleaned at a time, with short cleaning time and high efficiency.
Instead of traditional manual cleaning, solve the problem of ultrasonic cleaning and reduce the phenomenon of chip throwing.
Atomized water, supersonic spray cleaning, completely solve the dirt and impurities that cannot be cleaned by ultrasonic.
It will not be unclean due to the smaller and smaller diameter of suction nozzle.
More thorough cleaning, directly extend the life of suction nozzle, and the cleaning rate is more than 99%
Easy to operate, the interface can switch between Chinese and English.
Never use cleaning agent, only clean with clean water or deionized water.
Touch screen control interface, easy to understand operation.
Suitable for all kinds of applicator nozzles, The cleaning effect of cross, I-shaped and special suction nozzle is more obvious.