This machine is designed for applying heat shrinkable sleeves onto AC and DC cables, other electronic wire ends, and cable terminals.

1. This machine can automatically cut heat shrinkable tubing into required length.

2. The operator inserts the wire end into the guide hole, stepping on the foot switch, and the device will heat shrink the tubing automatically.

3. The shrinkable tubing length, specifications, and heat shrink temperature can be adjusted by changing settings and replacing corresponding accessories.


Model WS-TG210A
System control mode PLC/touch screen
Applicable sleeves OD 2.0φ/8.0φ (optional fixture)
Hot-melt length hot-melt length (optional fixture)
Operating temperature 0°C-50°C
Storage temperature -20℃-60℃
Operating humidity 10%RH-90%RH (no condensation)
Power 850W
Production efficiency 800~2,500 PCS/H
Operation cycle 2.5 seconds
Melting temperature 200℃-380℃
Cooling method forced air cooling
Weight 75 kg
Dimensions 500mm*640mm*1,300mm (L*W*H)
Power supply AC220V 50/60HZ
Air pressure 6.5/7.0KPa (compressed air must be dry, sufficient and oil-free. Otherwise it will affect the performance of the equipment).

4.3 inch colorful TFT

For more detailed information about the equipment and brand download the brochure.

Other Products:

Schedule a meeting with our experts

Schedule Meeting