
R501DH
Selective Soldering Robot
We recommend you register with us to receive all our catalogs, we recommend you the next equipment.
R501DH information
Selective Soldering Robot
- Flx-DropJet : Standard equipped with drop jet valve from Germanny originally, which can meet dia 2mm flux dot dimension.
Selecting Soldering Pot Selecting Soldering Pot - Titanium soldering pot, 100% capable for lead free application. Standard equipped with mechanical pump, easy for maintenance.
- N2 direct heating system is standard equipped,enhance the wetting ability for lead free sodlering.
Live Camera Live camer - Sod-ProcMoni: Without open machine’s door, operator can see soldering process in real time.
Preheating Preheating - Pre-BPRE: Bottom preheating zone, before soldering PCB will move here to heat up setting time under setting temperature.
Solder nozzle Solder nozzle - Sod-WetNoz: Standard equipped with wet nozzle for customer’s universal applicaiton. Can also design solder nozzle according cusotmer’s application.
● Small footprint, only W990mm x D1308mm.
● Max board L350mm x W260mm (Can manually rotate board to 180degree to meet L700mm x W260mm).
● English Windows 10 interface.
● 3 servo motors and servo drivers for motion.
● Drop jet fluxer made in German.
● Solder pot system with capacity 15kgs.
● Wave height calibration system.
● Bottom IR preheating zone.
● “on-time” liver camera to show soldering process.
● Pre-maintenance count down function.
General
- Operating power/Max power: 4KW/6.5KW
- PCB dimension: 50×50—350x260mm (Can manually rotate board to 180degree to meet L700mm x W260mm)
- Machine dimension: W910mm x D1300mm X H1714MM
- Net weight: 400KG
- Power supply: 1PH 220V 50HZ MAX 30A Equip 40A contactor in factory
- Air supply: 3-5 bars
- Exhausting required: 200M3/h
Solder Management
- Standard Solder Stations: 1
- Solder Pot Capacity: 15 kgs
- Heat-Up Time: About 40mins
- Solder Pot heater: 380 ℃
- Solder Pot heater: 1.2kw
Solder Nozzles
- Mini Wave Nozzles: Dia 2 to 8mm
- Customized nozzle: Available
- Nozzle Material: Proprietary Alloy
Flux Management
- Spray Flux Nozzle: Standard equipped with drop jet nozzle made in Germany
- Flux Capacity: 1L
- Flux Tank: Constant pressure tank
Preheat
- IR heater: 2kw
Controlling System
- Industrial PC: Yes
- Typical Program Time: 10 Minutes
- Program method: Draw path in scanned picture of board:
- Controlling system: PC
This equipment does not have optional accessories to show.

Point and Click
- To draw path with scanned picture as background, easiest way for path programming.
Solder path editing
- Moving speed,Z height, wave height, Dwell time, wave slope speed etc are editable, get max flexibility to fit different type of components on the board. Empth move time, site working time, total cycle time are estimated once path programming finished. Easy for balance production line.
Maintenance & replacement assisting function
- We know how important the maintenance for a selective soldering machine. In the software, we list all maintenance job, time taking, comsumable parts life and remain life, etc. It can export to excel list, engineer can check what parts need to replace in next 3 month or 6 months, in this way to they can prepare everything in advance.
Soldering Robot Video
Suggested Equipment
For the back end area we have a wide variety of automated and robot equipment. We invite you to know the solutions and their characteristics.